产品详情：M3200压力传感器
The M3200 pressure transducer from the Microfused line of TE is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.
The transducer pressure cavity is machined from a solid piece of 17-4PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. With excellent durability, there are no O-rings, welds or organics exposed to the pressure media.
TE’s proprietary Microfused technology, derived from demanding aerospace applications, employs micromachined silicon piezoresistive strain gages fused with high temperature glass to a stainless-steel diaphragm. This approach achieves media compatibility simply and elegantly while providing an exceptionally stable sensor without the PN junctions of conventional micromachined sensors.
This product is geared towards industrial and commercial OEMs for small to high volume applications. Standard configurations are suitable for many applications. Please contact factory for your customization needs.
技术指标：
类 型：
表压
量 程：
0～7，10，20，250，35，70，200，350（Bar）
精 确 度：
±0.25%
输 出：
0～100mV，0.5～4.5V，4～20mA
，0～5V，0～10V，I2C
供电电源：
5V, 10～30VDC,2.7
～5V
工作温度：
-40
℃
~125
℃
电气连接：
电缆、Hirshman，Packard
螺纹接口：
M20×1.5，1/4NPT，1/4BSP，可根据客户要求OEM定制
特 点：
一体式不锈钢结构，模拟/放大/数字输出，高精度，OEM定制
典型应用：
液压和气动系统，能源和水处理，注塑机、泵和压缩机，汽车测试系统，医用气压，检漏设备，遥测系统，压力测量
版权声明：网站转载的所有的文章、图片、音频视频文件等资料的版权归版权所有人所有。如果本网所选内容的文章作者及编辑认为其作品不宜公开自由传播，或不应无偿使用，请及时联络我们，采取适当措施，避免给双方造成不必要的经济损失。